CPS-A - Calectro Netherlands Sales

BRAND	Calectro
Product	CPS-A
Description	Differential pressure transmitter -50 - +3500 Pa
Internal code	IMP3306403
Weight	0.16
Custom code	90321020
Technical specification	CPS-A pressure sensor has a built-in differential pressure element, which helps to achieve high accuracy and Linearity is temperature-compensated. With a DIP switch, the desired pressure measurement range is discontinued. The output signal (0-10V or 4-20 mA) and the desired signal attenuation are also provided with set to the DIP switch. Housing terminal and cable connection (with pre-assembled M16 screws) can be removed, which simplifies installation. The housing cover has on the top edge a hinge and at the bottom a snap lock with locking hook, which closes the lid in When folded up, keeps it open. Supply voltage: 24V AC/DC ± 10% Power consumption: approx. 31 mA output signal: 0-10V/4-20 mA Pressure ranges: -50-50/0-100/-300/-500/-700/-1000/-200/1-3500 Pa Accuracy: Usually ± 1% of measured pressure Green LED: Lights continuously: normal operation Flashes: zero pressure calibration Ambient temperature: -20 to +50°C Cable inputs: 1xM16, 5-10 mm cable 2 m hose and 2 nipples Dimensions (WxHxD): 78x90x40 mm Protection class: IP54

Please Contact Us to Order to offer competitive prices and delivery time for Calectro - CPS-A Differential pressure transmitter -50 - +3500 Pa number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Netherlands Industrial products Market.

WE SELL ONLY NEW AND ORIGINAL PRODUCTS!

Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.

	CPS-A.pdf
	cpsa_en_db.pdf

More products of Calectro

ST-P-DA

Calectro Optischer Rauchmelder-Einsatz

ST-P-DA-24VRL

Calectro Optical smoke switch 16-30 V DC, including short-circuit relay for use in raumen to fruezeitigen detections of Schwellbraenden fire and fire with smoke development .The sensor operates on the principle of scattered light, alarm relay with a potential-free changeover, including mounting base, the light transmitter and receiver are arranged in the Messa chamber so that the Lichtbuendel of the transmitter do not apply directly to the receiver kann.Erst the scattered light on suspended particles (Tyndall effect) reaches the receiver and is in an electrical signal umgesetzt.Eine green LED pollution (service), a red LED indicates the alarm. relay contact loads with 24 V / 1 A. Ambient temperature: minus 20 plus 50 degrees .Leistungsaufnahme: 2.64 watts; VDS test certificate: 205041

UG-3-A4-0

smoke detector

UG-3-O

Air duct smoke detector 24V DC

ST-P-DA-24VR

Optical Smoke Detector Insert

UG-2-A4O-OPP-230 - obsolete, replacement UG-5-AFR-230V-Z

Air duct smoke detector

UG-5-AFR-230V-Z-ST2

Calectro Luftkanalrauchschalter

UG-2-A40 obsolete, replacement UG-5-AFR-24V

Air duct smoke detector